Carbon Fiber Glass aspiration and filtration system
Carbon dust abatement
- Type of system: Carbon dust filtration and suction
- Air flow: 21,000 m³/h
- Filter type: Cartridge filter AirCompact ATEX mod.
- Fan: PRM 630/4 – 30 kW
For the extraction and the collection of carbon dust produced during processing a system was realized as follows: the reclamation of the work environment and the exchange of air are obtained by creating a uniform air flow from the top down, through the suction at the front thanks to a front part, which measures 2 x 6 m and is 500 mm deep.
The suction wall will be divided into two with two 2 m x 3 m exhaust sections. The plant is equipped with two pneumatic shutters to exclude one wall or the other. With the use of a preset inverter at two different stages, 30 Hz and 50 Hz, it is possible to automatically adapt the flow in function of the number of walls in use. The filtration of the extracted flow is obtained by installing a cartridge filter, AIRCOMPACT model, appropriately sized according to extracted air flow and which complies with ATEX regulations.
The necessary aspiration and the consequent uptake of flush wall speed are obtained through a centrifugal electrical exhauster positioned outside the shed that in addition to ensuring suction conveys the gas, once filtered, into the atmosphere through the exhaust stack.
For the aspiration and filtration of VOC deriving from a paint machine, the following system has been realized.
Extraction and air treatment system from storage and treatment areas of biological sludge, flow rates up to 70,000 m³ / h.
For smoke collection of three coal-fired boilers 3 AIRCOM sleeves filters were installed with demister, with a total treated air flow of 185,500 m3 / h.