For the aspiration and filtration of VOC deriving from a paint machine, the following system has been realized.
Some of our successful realizations and installations
Extraction and air treatment system from storage and treatment areas of biological sludge, flow rates up to 70,000 m³ / h.
For smoke collection of three coal-fired boilers 3 AIRCOM sleeves filters were installed with demister, with a total treated air flow of 185,500 m3 / h.
For the extraction and the collection of carbon dust produced during processing a system was built as follows.
For dust suction and filtration from blasting cabins a dust suction and filtration plant has been made as follows.
The suction and filtration system for aluminum shavings was thus realized.
For the extraction and the collection of dust produced during processing, a system was installed as follows.
For the extraction and collection of ammonium perchlorate dust that develops during the stages of loading/unloading of waste containers we plan the installation of a system made as follows.
A discing cabin was installed as follows: an 800 mm wide raging tank has been made where the piping and sector uptake hoppers with manual dampers for flow regulation and reduction have been placed.
For the extraction and the removal of dust developed during production, a system was built as follows.
For the extraction and filtration of rubber dust from grinding of tyres a system was built as follows.
For the extraction and the removal of carbon fiber powders that develop from 4 machine tools a system was built as follows.
For the extraction and filtration of the carbon dust resulting from the FTP machine the following system was built: some suitably sized suction pipes are positioned on the outside coupling on the steel structure of the machine tool.
For the extraction and removal of odours from the production of food flavourings in the weighing area a system was built as follows: a front hood, made of sturdy galvanized steel, internally strengthened and appropriately sized was placed near the area where the pollutant originates from.
A system for the extraction and filtration of pellet dust, produced from bagging operations, was built as follows: 10 suction points distributed over 3 hoppers for loading of material, have been positioned in order to allow a correct suction of all dust and to prevent its dispersion in the environment.
For the extraction and the collection of welding fumes that develop during processing a system was installed as follows.
During years, Coral Engineering dealt with several projects, dedicating to the realization of air purification systems for the most varied industrial fields.