Logo Coral

Tubazione in Acciaio Inox_EN

Type               : AISI 304/316 Steel

Quality           : DX51D+Z

Thickness used: 10/10 to 15/10 of mm

Ref. Regulation: European EN 10142-00


Aspiration STRAIGHT PIPE, prefabricated, built with first choice AISI 304/316 galvanized steel sheet with stapling in parts of maximum 5.000 mm to allow expansion or any change without any particular problems, sized according to the technical characteristics of the plant.


Anti-vibration FITTING in AISI 304/316 and plastic coated fibreglass fabric placed on the suction port, able to isolate the flow of air to the suction port of the fan.


CIRCULAR SECTION BENDS built AISI 304/316, formed by stapled and pinned sectors or printed in two halves and pinned with radius ratio 1.5 the diameter to decrease to a minimum the load losses, saving power.


Reduction CONES in AISI 304/316 of adequate length to decrease the airflow resistance.


FLEXIBLE HOSE TIES in various diameters made of galvanized wire with set screw.


Support BRACKETS for the piping in painted iron, able to withstand safely the specific load.