Suction arms are the ideal solution for the elimination of various contaminants released by industrial processing processes. Aspiration takes place directly in the point where the harmful substances are emitted, avoiding damages to workers’ health.
Presence in the field of design and manufacturing of air purification systems for over 50 years
Compact cartridge filters are mainly used in indoor and small spaces. The compact and sturdy design integrates all the necessary elements for an efficient aspiration and filtration process of dry fumes and dust.
Horizontal cartridge filters for fumes and dust filtration, including plasma cutting fumes, ensure easier and faster filters replacement and maintenance operations, thanks to their different set up.
Industrial processing generating limited concentrations of fumes and dust can use mechanical dry filtration of cartridge filters, equipped with a wide filter surface which is able to clean inlet air, retaining and separating solid particles.
I filtri a maniche trovano impiego in numerosi processi industriali di lavorazione a secco di materiali. Dotati di maniche in diversi materiali in base all’inquinante da abbattere, la loro ampia superficie filtrante è in grado di aspirare e filtrare anche elevate concentrazioni di fumi secchi, polveri molto fini e particelle metalliche. Disponibili sia nella versione standard che nella versione ATEX.
For the aspiration and filtration of VOC deriving from a paint machine, the following system has been realized.
Extraction and air treatment system from storage and treatment areas of biological sludge, flow rates up to 70,000 m³ / h.
For smoke collection of three coal-fired boilers 3 AIRCOM sleeves filters were installed with demister, with a total treated air flow of 185,500 m3 / h.
For the extraction and the collection of carbon dust produced during processing a system was built as follows.
For dust suction and filtration from blasting cabins a dust suction and filtration plant has been made as follows.
The suction and filtration system for aluminum shavings was thus realized.
For the extraction and the collection of dust produced during processing, a system was installed as follows.